NVT 100 Near-Vertical Rotor 100.000 rpm, 750.000 x g, 8 x 5.1 mL
NVT 100 Titanium Rotor Assembly.
Includes: Part Number Description: 366011 Vise Adapter, 858121 Torque Wrench, 976959 Torx Plug-Wrench Adapter, 306812 Spinkote Lubricant, 363304 Overspeed Disks, 100,000 rpm.
Note: Non-precipitating solutions up to 1.7 g/mL in density can be run in this rotor without a reduction in rotor speed. For speed reductions for CsCl prescription, refer to the rotor manual.
For use in Optima-Series ultracentrifuges and/or instruments classified: RS
|Rotor Type||Near-Vertical (Ultracentrifugation)|
|Maximum RPM||100,000 rpm|
|Number of Tubes||8 5.10; mL 13.00 / 8 5.10; mL 0.51|
|Caps and Spacers||342883 │ 345827|
NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS
The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.