MET ONE 6015P Remote with Pump (Ethernet and Analog Interfaces, AC Power)

2088615-PF-DA


The 6015P adds serial communication and an integrated relative humidity and temperature port. This port enables the use of an optional probe that includes RH/Temp data along with the particle count data stream to further simplify installation and increase the information your monitoring system provides. The MET ONE 6000P series remote airborne particle counter offers accurate and reliable continuous particle monitoring. With a sensitivity range of 0.5 to 10 μm, the MET ONE 6000P series is designed to meet the specific needs of cleanroom operations within the pharmaceutical, semiconductor, hard disk drive and flat panel display industries. With an array of industry leading features and simplified installation options, the MET ONE 6000P is easy to integrate with any facility monitoring system. These features also reduce downtime for instrument removal and reinstallation during routine calibration and preventative maintenance cycles. Built with Long Life Laser technology, the MET ONE 6000P offers enhanced diagnostic features that reduce troubleshooting time and related downtime costs.

Specifications

Platform APC Instruments
Performance ISO 21501-4 unit-to-unit accuracy & reproducibility
Light Source Long Life Laser™ Diode
Flow Rate 28.32 L per minute
Zero Count ISO 21501-4 & JIS B 9921 (1 count or less in 5 min; 95% UCL)
Coincidence Loss 10% at 20,000,000 particles/m3
Count Alarms, Display & Cycles User-defined alarm counts displayed via LED on box or remote LED
Data Storage 1,000 samples (oldest records overwritten when buffer is full)
Interfaces & Protocols Analog 4-20 mA, Ethernet with Modbus TCP protocol, Pulse
Power Requirements 50/60 Hz, 100-240 VAC, 0.4 A Max
Temperature Range Operating temperature range: 10°C to 32°C, Storage temperature range: -40 to +70°C
Environmental Conditions Indoor Environment
Humidity Restrictions 80% (non-condensing)
Pump Type Air vacuum, rated for continuous use
Color Silver
Weight 4.60|kg / 10.1412640605044|lb
Width 17.20|cm / 6.77165354330709|in
Depth 31.80|cm / 12.5196850393701|in
Height 11.50|cm / 4.52755905511811|in

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.